What Is GGG50 Cast Iron? Specs, Hardness, and Differences vs GGG40
GGG50 is a ductile cast iron grade with spheroidal graphite, commonly matched to EN-GJS-500-7 under EN 1563. Compared with GGG40 / EN-GJS-400-15, it typically offers higher tensile and proof strength with lower elongation. Selection should follow design priorities—not an automatic preference for the higher number.
Taimaz Foolad (Metco) casts ductile-iron parts in grades such as GGG40 and GGG50 when specified for industrial duty.
Quick Comparison
| Item | GGG40 | GGG50 |
|---|---|---|
| Common EN equivalent | EN-GJS-400-15 | EN-GJS-500-7 |
| Family | Ductile iron (spheroidal graphite) | Ductile iron (spheroidal graphite) |
| Typical relative emphasis | Higher elongation | Higher tensile / proof strength |
| Drawing substitution | Needs technical review | Needs technical review |
Structure and Standards
GGG50 (GGG-50) is the older DIN 1693 style name; EN-GJS-500-7 is the common European designation. Graphite is spheroidal. Main mechanical indices are tensile strength, proof stress, and elongation.
In EN-GJS-500-7, 500 relates to the tensile-strength class and 7 to the elongation class. Section thickness and sampling method affect achievable values.
Reference Properties (Example Producer Table)
Example published data (Jürgens) for EN-GJS-500-7:
| Effective thickness | Min Rm | Min Rp0.2 | Min A |
|---|---|---|---|
| Up to 30 mm | 500 MPa | 320 MPa | 7% |
| >30 to 60 mm | 450 MPa | 300 MPa | 7% |
| >60 to 200 mm | 420 MPa | 290 MPa | 5% |
Hardness rises with a stronger matrix tendency but varies with section and processing; hardness alone does not fully certify grade.
Chemical Analysis
Example reference ranges (illustrative, not a universal mandatory analysis):
| Element | Mass % (reference) |
|---|---|
| C | 2.7–3.7 |
| Si | 0.8–2.9 |
| Mn | 0.3–0.7 |
| P | ≤0.10 |
| S | ≤0.02 |
Chemistry alone cannot reliably distinguish GGG40 from GGG50—mechanical properties and microstructure define the grade outcome.
Key Differences vs GGG40
- Tensile and proof stress: GGG50 typically higher in corresponding conditions
- Elongation / ductility: GGG40 typically higher
- Hardness / wear / machining: GGG50 may machine differently if harder; wear resistance is not automatic from grade name alone
- Impact and fatigue: evaluate by design loads and specified toughness—do not assume either grade always wins
Which Grade Fits Your Part?
- Choose GGG50 when higher strength is the priority and lower elongation is acceptable.
- Choose GGG40 when deformation capacity / elongation is more important.
- If both are technically acceptable, compare section, machining, cost, and risk—not only the grade number.
Applications, Substitution, and Cost
GGG50 is used in industrial housings, machinery parts, and loaded castings where higher strength is specified. Do not swap GGG40 and GGG50 on a drawing without engineering approval. Cost is affected by melt practice, scrap/returns, heat treatment, machining difficulty, rejection risk, and inspection scope—not grade name alone.
Taimaz Foolad (Metco) can review GGG40 and GGG50 casting feasibility from drawings or samples for industrial projects.
FAQ
Is GGG50 the same as EN-GJS-500-7?
Commonly treated as equivalents; confirm order documents.
Main difference vs GGG40?
Higher strength vs higher elongation emphasis under corresponding conditions.
Typical elongation class?
EN-GJS-500-7 uses a 7% elongation class; actual minima vary with thickness/sampling.
Can grades be swapped without changing the drawing?
No—technical approval is required.







