Difference Between Backhoe Teeth and Excavator Teeth | Complete Selection Guide
Backhoe loader teeth and excavator teeth are not interchangeable. Geometry, wall thickness, pin systems, adapters, and hardness profiles are designed for different digging styles. Taimaz Foolad (Metco) manufactures dedicated Metco ranges for both machine families so contractors can match the tooth to the real job—not to a generic spare-parts catalog.
Complete Metco Tooth List
| Machine type | Exact Metco model | Code stamped on tooth | Net weight (kg) | Overall length (mm) | Primary use |
|---|---|---|---|---|---|
| Backhoe loader Metco 130 | ML003 | ML003 | 3.8–4.2 | 185–195 | Rear digging bucket + front loader work |
| Backhoe loader Metco 100 rear | ML005 | ML005 | 2.9–3.1 | 165–175 | Precision work (pipe, cable, small foundations) |
| Backhoe loader Metco 100 front | ML004 | ML004 | 3.1–3.4 | 170–180 | Fast loading on the front loader |
| Excavator 20–25 t Metco PC200 | ML011 | ML011 | 6.2–6.8 | 260–275 | Building excavation, road work, ordinary soil |
| Excavator 22–28 t Metco PC220 | ML010 | ML010 | 7.1–7.7 | 275–290 | Semi-hard soil, sand and gravel |
| Excavator 36–45 t Metco PC400 | ML006 | ML006 | 13.5–15.5 | 350–375 | Hard soil, cobbles, soft rock |
| Excavator 70–90 t Metco PC800 | ML014 | ML014 | 32–36 | 480–510 | Large mines, rock cutting |
| Excavator >120 t Metco PC1250 | ML016 | ML016 | 55–65 | 620+ | Major copper, iron, and coal mines |
Structural Differences: Backhoe vs Excavator Teeth
| Technical parameter | Metco backhoe tooth (130 & 100) | Metco excavator tooth (PC200–PC1250) |
|---|---|---|
| Body wall thickness | 18–22 mm | 30–65 mm |
| Attack angle | 48–52° (high precision) | 28–35° (deep penetration) |
| Tip radius | Larger (wears more slowly) | Smaller (sharper, more aggressive) |
| Pin location | Top pin (vertical lock) | Horizontal or dual pin (heavy system) |
| Adapter type | Light welded adapter | Heavy welded or bolted adapter |
| Tip hardness (HRC) | 48–51 | 50–54 |
| Body hardness (to prevent fracture) | 38–42 | 42–46 |
| Final coating | Oven-cured blue anti-rust + epoxy | Two-layer blue + nano wear coating (400 and above) |
Real Application Differences on Iranian Projects
| Real project | Machine | Metco model used | Average recorded life (hours) | Field notes |
|---|---|---|---|---|
| Tehran Metro (Lines 6 & 7) | PC200 excavator | Metco PC200 | 680–750 | Clay + gravel; change every 35–40 days |
| Isfahan Metro | PC220 excavator | Metco PC220 | 620–700 | Loose soil; change every ~30 days |
| Chamshir Dam, Kohgiluyeh | PC400 excavator | Metco PC400 | 1,100–1,350 | Hard soil + cobbles; best performance |
| Sarcheshmeh copper mine | PC800 excavator | Metco PC800 | 1,400–1,800 | Hard rock; carbide coating added |
| Rural gas piping, Mazandaran | Backhoe 130 | Metco 130 rear | 350–450 | Wet soil; change every 20–25 days |
| Pressurized irrigation, Fars | Backhoe 100 | Metco 100 rear | 320–420 | Precision work; lowest wear |
Why Iranian Contractors Prefer Metco
- Permanent stock availability
- Stable pricing without dollar swings (100% Iranian production)
- Real 6-month replacement warranty—even if the tooth breaks
- Genuine Metco pins and rubber retainers that do not seize
- The well-known oven-cured blue finish as a quality signature
- Free 24/7 technical consultation
- Installment options for ranked contractors
- Distribution across 28 provinces (Bandar Abbas to Urmia)
- Hardness and metallurgy tests from accredited labs with every lot
- 23 years of track record without a serious quality complaint case
Professional Maintenance Tips That Can Raise Metco Tooth Life by Up to 70%
| Tip | How to apply | Life increase |
|---|---|---|
| Regular tooth rotation | Swap side and center teeth every 100–150 hours | +40–60% |
| Use shrouds (adapter protectors) | Install them in abrasive soils | +50–80% |
| Grease the pin before install | Use high-temperature grease | Prevents seizing |
| Daily high-pressure wash | Fully remove mud and clay | ~90% less corrosion |
| Replace at 45–50% wear | Do not wait until 60% wear | Protects the adapter |
FAQ for Contractors
Can a PC200 excavator tooth be fitted on a backhoe? No. The adapter is completely different and will fail immediately.
Why are Metco teeth blue? The oven-cured blue is applied at about 220°C and marks genuine Metco alloy. Counterfeits usually use ordinary paint.
What is the best model for a backhoe 130? Metco 130—more than 85% of Iranian backhoes use this range. Contact Taimaz Foolad (Metco) with your machine model for the correct code, pin kit, and stock confirmation.







