What Is Gray Cast Iron? Types, Chemistry, and Applications
Gray cast iron is an iron alloy in which a significant portion of carbon exists as flake (lamellar) graphite in a metallic matrix. The flakes give a gray fracture appearance. Good machinability, vibration damping, and thermal conductivity make it useful for machine bodies, brake discs, engine blocks, and some pump casings. It has low ductility and is usually not the first choice where severe impact or large plastic deformation before fracture is required.
Taimaz Foolad (Metco) casts gray-iron industrial parts when the duty matches flake-graphite properties.
Why Is It Called Gray Iron?
Known as gray or grey cast iron, it is based on iron, carbon, and silicon, with manganese, sulfur, and phosphorus also present. Flake graphite on the fracture surface creates the gray look—the name refers to fracture color, not necessarily the outer casting surface. It is not the same as ductile (nodular) iron, where graphite is mainly spheroidal. GG20 and GG25 are grades within the gray-iron family, not the whole family.
How Structure Controls Properties
Flake graphite aids machining and damping but creates stress concentrators, so tensile and impact behavior can be brittle. Vibration damping is not the same as impact toughness. The metallic matrix also matters: ferrite is typically softer; more pearlite usually raises hardness and strength under comparable conditions. Properties depend on graphite shape/size/distribution and matrix type—not carbon content alone.
Chemistry and Element Roles
Typical ranges are about 2.5–4% carbon and 1–3% silicon by weight—general guides, not mandatory analyses for every grade.
| Element | Role |
|---|---|
| Iron (Fe) | Base matrix |
| Carbon (C) | Graphite and matrix constituents; affects solidification and properties |
| Silicon (Si) | Promotes graphite formation |
| Manganese (Mn) | Interacts with sulfur; affects matrix and carbide stability |
| Sulfur (S) | Affects nucleation, sulfides, and final structure; must suit the process |
| Phosphorus (P) | Limited by application; higher levels can form hard, brittle phosphide |
| Alloying elements | Cu, Ni, Cr, Mo, etc., used when needed to tune properties |
Carbon equivalent helps interpret solidification behavior but does not replace full chemistry, microstructure, and mechanical testing. Chemistry alone does not confirm grade: ASTM A48 classifies by tensile strength, and composition is a means to meet properties. Similar chemistry can still yield different properties with different section thickness, inoculation, and cooling.
How Gray Iron Is Classified
By matrix
- Ferritic: typically softer, easier machining; flake graphite still limits ductility
- Pearlitic: usually harder and stronger; often considered for strength and wear needs
- Ferritic–pearlitic: mixed behavior depending on phase balance
Ferritic gray iron is not malleable iron—graphite remains flake-shaped.
By graphite distribution (ASTM A247 style A–E)
Type A is relatively uniform random flakes; B clustered/rosette; C coarse primary flakes with finer graphite; D fine interdendritic random; E interdendritic with preferred orientation. Letters are not strength grades.
By grade (GG / EN-GJL)
| Common GG name | EN equivalent |
|---|---|
| GG15 | EN-GJL-150 |
| GG20 | EN-GJL-200 |
| GG25 | EN-GJL-250 |
| GG30 | EN-GJL-300 |
| GG35 | EN-GJL-350 |
When matching old drawings, check standard requirements, section thickness, and sampling/test conditions. Higher grade is not always better—match duty and machinability needs.
Typical Properties and Uses
- Good damping for machine bases and housings
- Good machinability for many industrial parts
- Useful thermal conductivity for some thermal-cycling components
- Common in pump/valve bodies, gearbox housings, brake parts, and machinery frames when impact demands are moderate
Avoid selecting gray iron solely because it is familiar—if toughness or elongation is critical, ductile iron or steel may be more suitable.
FAQ
Is gray iron the same as ductile iron?
No. Graphite shape differs (flake vs spheroidal), so mechanical behavior differs.
Does chemistry alone define GG25?
No. Grade acceptance is based on specified mechanical/hardness criteria and related agreements, not a single fixed chemistry table.
Can Taimaz Foolad cast gray-iron parts?
Yes. Taimaz Foolad (Metco) produces gray-iron castings for industrial applications when grade and duty are specified.







